Chromatography Tubing
Microsolv Technology Corporation Tubing, PEEK, Coiled, 0.030" ID, 1/16" OD. 945mm L, General Grade, Green, with Tubing Connectors. 1 EA.
These Flexible, Coiled PEEK Tubes will expand and contract which will save space in places such as behind an instrument and provide a Pulse Dampener Effect for Parabolic Flow Fluids which will result in a quieter base line and also reduce band broadening due to excess tubing lengths. This coil is 20mm wide when resting and 120mm when fully extended, with a total tubing length of 945mm, end to end. Color Coded: Green for 0.030" (0.75mm) ID
Microsolv Technology Corporation Tubing, PEEK, 0.007" ID, 1/16" OD, HPLC grade, yellow stripe. 25-meter roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The yellow stripe indicating size is applied to the outside of the tubing leaving the interior all-natural PEEK which eliminates color leachables. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Yellow Stripe for 0.007" ( 0.18mm ) ID. Pressure rating: 5800 psi with proper mobile phase.
Trajan Scientific Tubing PEEKSil Green Medical 2/PK
1/16 OD x 0 125 mm ID x 700 mm length PEEKsil tubing green PK2
Advanced Materials Technology MARVELXACT PEEKSIL 100 ID
Advanced Materials Technology’s MarvelXACT finger-tight UHPLC connectors with volume definitions easily identifies dispersion volume contribution. Haptic “click” indicates optimum torque and zero dead volume connection. Connector and tubing for both pre and post column installation
Optimize Technologies 1/16" OD x .030" ID x 10cm Stainless Steel Tubing
Optimize's stainless steel tubing is pre-cut, micro polished, seamless, guarantees square/burr-free ends, and is passivated prior to shipment. The tubing is available in many different lengths and OD/ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Optimize Technologies 1/16" OD x .040" ID x 10cm Stainless Steel Tubing
Optimize's stainless steel tubing is pre-cut, micro polished, seamless, guarantees square/burr-free ends, and is passivated prior to shipment. The tubing is available in many different lengths and OD/ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Trajan Scientific Tubing PEEKSil Beige Medical 2/PK
1/16 OD x 0 05 mm ID x 300 mm length PEEKsil tubing beige PK2
Trajan Scientific Tubing SS Stainless Steel 1/EA
0 50 mm OD x 0 25 mm ID x 55 m length stainless steel tubing
Chrom Tech Inc PEEK TUBING 0.004 ID BLACK 5FT
This item has a minimum qty of 2 per supplier requirements.
PEEK TUBING 0.004 ID BLACK 5FT
Waters Corp Waters Seal Wash Priming Adapter, Quality Part, 1 pk, for Alliance HPLC System
This seal wash priming adapter is a Waters Quality part designed for use with the Alliance HPLC system 2695 Separations Module and the 2695D Dissolution Separations Module.
- Provides priming for seal wash.
- Quality part.
- Compatible with Alliance HPLC system 2695 Separations Module.
- Compatible with 2695D Dissolution Separations Module.
- Supplied as 1 unit per package.
- Replaced as required.
Waters Corp Waters Tubing, PEEK, 0.062 in. x 0.0025 in. x 6 ft., UPLC
This spare part is a Waters Quality part.
- Type: Tubing
- System type: UPLC
- Material: PEEK
- Dimensions: 0.062 in. x 0.0025 in. x 6 ft.
- Replacement schedule: As required
Waters Corp Waters Tubing Kit, Fraction Collection, 0.020 in ID
Waters Tubing Kit, Fraction Collection, 0.020 in ID
Waters Corp TUBE ASSY, TRANSDUCER-MIXER
Tube Assy, Transducer-Mixer,Pumps, Mechanical, 1525 Micro HPLC Pump